Omron R88D-KN01L-ECT-L User Manual page 175

Noise Filter for the Brake Power Supply
Use the following noise filter for the brake power supply.
Model
SUP-EK5-ER-6
Additional Information
Noise can also be reduced by 1.5 turns with the ZCAT3035-1330 (TDK) Clamp Core.
Radio Noise Filter and Emission Noise Prevention Clamp Core
Use one of the following filters to prevent switching noise of PWM of the Servo Drive and to prevent
noise emitted from the internal clock circuit.
Model
*1
3G3AX-ZCL1
*2
3G3AX-ZCL2
*3
ESD-R-47B
ZCAT3035-1330
*1 Generally used for 1.5 kW or higher.
*2 Generally used for 1.5 kW or lower. The maximum number of windings is 3 turns.
*3 Generally used for 100 W. The maximum number of windings is 2 turns.
*4 Also used on the Drive output power lines to comply with the EMC Directives. Only a clamp is used.
This clamp can also be used to reduce noise current on a FG line.
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
Rated Rated
current voltage
5 A 250 V
Manufacturer
OMRON
OMRON
NEC TOKIN Corporation
*4 TDK
Leakage current
1.0 mA Okaya Electric
(at 250 Vrms, 60 Hz) Industries Co., Ltd.
Application
For Drive output and power cable
For Drive output and power cable
For Drive output and power cable
For External encoder and I/O cable
4 System Design
Manufacturer
4 - 39
4