Example For Configuring Log Messages To Be Output To The Log Host On The Public Network When The Management Vpn Instance Is Used - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
#
interface Vlanif10
ip address 172.16.0.1 255.255.255.0
#
interface GigabitEthernet1/0/1
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
ip route-static 10.1.1.0 255.255.255.0 172.16.0.2
ip route-static 10.2.1.0 255.255.255.0 172.16.0.2
#
return
5.7.3 Example for Configuring Log Messages to be Output to the
Log Host on the Public Network when the Management VPN
Instance Is used
Output logs of multiple types and severity levels to different log hosts through information
channels.
Networking Requirements
As shown in
different log hosts through information channels.
Switch sends the logs (with the severity level as notification) generated on the Forwarding
Information Base (FIB) module and the IP module to the log host Server 1. Server 3 functions
as a backup switch of Server 1.
Switch sends the logs (with the severity level as warning) generated on the Point-to-Point
Protocol (PPP) module and the AAA module to the log host Server 1. Server 4 functions as a
backup switch of Server 2.
Both the switchs and the log hosts require to be configured.
A management VPN instance is configured on the switch.
Figure 5-6 Networking diagram of configuring log messages to be output to the log host on the
public network when the management VPN instance is used
10.2.1.2/24
Configuration Roadmap
The configuration roadmap is as follows:
Issue 03 (2011-12-29)
Figure 5-6, it is required to output logs of multiple types and severity levels to
10.1.1.2/24 10.1.1.1/24
Server1
Server 3
Server 4
Server 2
10.2.1.1/24
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/1
172.168.0.1/24
Switch
5 Information Center Configuration
86