Fujitsu F2MC-16LX Hardware Manual page 615

Notes:
•
When the ROM mirror function register has been set, the mirror image data at higher addresses (
FFFFFF
H
•
For setting the ROM mirror function, see "23. ROM mirror function selection module" in " PERIPHERAL
RESOURCES".
Reference
•
The ROM mirror function is for using the C compiler small model.
•
The lower 16-bit addresses of bank FF are equivalent to those of bank 00. Since the ROM area in bank FF exceeds 48
Kbytes, however, the mirror image of all the data in the ROM area cannot be reproduced in bank 00.
•
When the C compiler small model is used, the data table mirror image can be shown at "008000
storing the data table at "FF8000
declaring the far addressing with the pointer.
"
) of bank FF is visible from the higher addresses (
to FFFFFF
H
"
008000 to 00FFFF
H
". Therefore, data tables in the ROM area can be referred without
H
Appendix A Memory Map
"
FF8000
"
) of bank 00.
H
to 00FFFF
H
to
H
" by
H
599