Fujitsu F2MC-16LX Hardware Manual page 183

*2: "Output enabled" means that the contents of operation appear via the pin because the pin driving transistor is in driven
state and operation of the internal circuit remains enabled.
*3: Same as the other ports if this is being used for the output state. "Input enabled" means that the input function is currently
enabled; Pull-up/Pull-down or an input from the external is required.
*4: If this is being used as an output port, it holds the preceding value.
*5: Outputs the initial output preceding this mode. Alternatively, this means "Input disabled" if the signal is input. "Input
disabled" means that the contents of a pin are not accepted internally, because the internal circuit is not in operation
although operation of the input gate nearest to the pin is currently enabled.
*6: "Input shutoff" indicates the state in which operation of the input gate nearest to the pin is inhibited. "Output Hi-Z"
means that the pin is placed at high impedance with the pin driving transistor placed in the drive disabled state.
*7: When operation stops due to a cause in the USB, the signal is input via the USB port. When it stops due to another cause,
the preceding state remains unchanged.
*8: There is no influence in the pin USB operation.
Note:
If a USB is in use, transition to the sleep mode is inhibited. The mode transits to the stop mode is
also inhibited during the USB is transferred.
CHAPTER 6 LOW-POWER CONSUMPTION MODE
167