Fujitsu F2MC-16LX Hardware Manual page 408

CHAPTER 16 16-BIT RELOAD TIMER
[bit 1] CNTE (timer counter permission)
It is a bit by which the timer counter is permitted.
CNTE
0
1
[bit 0] TRG (Software trigger)
It is Software trigger bit. When 1 is written on the TRG, the software trigger is applied so that the reload
register contents of timer is loaded to the counter to start the count operation. Writing "0" has no
meaning. Reading is always "0". Always enabled only when the CNTE value is 1 regardless of the
operation mode.
TRG
0
1
392
Counter stop [Initial value]
Counter permission (startup trigger waiting)
There is no change (There is no influence on another).
Count operation start
Function
Function