Fujitsu F2MC-16LX Hardware Manual page 22

CHAPTER 1 OVERVIEW
Table 1.1-1 MB90330 Series Product Lineup List (2/2)
Product name
DTP/external interrupt
USB
µDMAC
External bus interface
The others
Package
Operating voltage
*: It is setting of Jumper switch (TOOL VCC) when Emulator (MB2147-01) is used. Please refer to the
MB2147-01 or MB2147-20 hardware manual (3.3 Emulator-dedicated Power Supply Switching) about
details.
Note:
Writing to the Flash, be sure to perform V
6
MB90V330A * MB90F334A
Input count: 8
Interrupt factor: rising edge/falling edge/"L" level/"H" level selectable
USB Function (Conforming to USB2.0 Full Speed)
Supports Full speed
Endpoint are specifiable up to six.
Transfer type: Control, Interrupt, Bulk, or Isochronous transfer possible
Dual port RAM (The FIFO mode is supported).
USB Mini-HOST Functions
It is (multi/no multi correspondence).
22 I/O pins with 5 V tolerant (including pins also used for I
PGA299
=3.13 V to 3.60 V more than.
CC
MB90333A
Corresponded
2
C)
LQFP120
3.3 V ± 0.3 V
MB90334A