Fujitsu F2MC-16LX Hardware Manual page 333

[bit 9] CANCEL: Token cancellation permission
This bit sets whether a token is to be cancelled when the token (which is issued in an EOF area) has
never been executed and is in waiting status if the SOFIRQ bit in the host interrupt register (HIRQ) is
"1". It is not initialized with the RST bit in the UDC control register (UDCC).
CANCEL
0 Token continuance
1 Token discontinuance
[bit 8] RETRY: Retry permission
This bit sets whether a retry is attempted when a NAK and CRC errors happen. It is not initialized with
the RST bit in the UDC control register (UDCC).
RETRY
0 No retry
1 Retry
[bit 7] RWKIRE: Reactivation interrupt request permission
It is a bit to set whether an interrupt is to be generated when the Mini HOST function can be operational
after resume operation has been completed. In host mode, to enter suspend status, write "1" to the SUSP
bit in the host state status register. Only the host mode is effective. It is not initialized with the RST bit
in the UDC control register (UDCC).
RWKIRE
0 Reactivation interrupt disable
1 Reactivation interrupt enable
[bit 6] URIRE: USB bus reset interrupt request enable
This bit sets whether an interrupt is to be generated when reset operation to the USB bus has been
completed. Only the host mode is effective. It is not initialized with the RST bit in the UDC control
register (UDCC).
URIRE
0 Interrupt disabled after USB bus is reset
1 Interruption enable after USB bus is reset
CHAPTER 14 USB Mini-HOST
Operation mode
Operation mode
Operation mode
Operation mode
317