Fujitsu F2MC-16LX Hardware Manual page 473

BRA LOOP
;----------Interrupt Program------------------------------------------------------------
ED_INT1:
MOV I:ADCS1, #80H
RETI
CODE ENDS
;----------Vector Settings------------------------------------------------------------------
VECT CSEG ABS=0FFH
ORG 0FF6CH
DSL ED_INT1
ORG 0FFDCH
DSL START
DB 00H
VECT ENDS
END START
CHAPTER 19 8/10-BIT A/D CONVERTER
; The A/D does not stop, The A/D conversion process
; program started by the EI
; clearance in the stop mode is shown.
; Interdiction
; Returns from interrupt.
; The vector is set in interruption #36(24
; Reset vector setting
; Setting Single-chip mode
2
OS with the interrupt flag
).
H
457