Fujitsu F2MC-16LX Hardware Manual page 334

CHAPTER 14 USB Mini-HOST
[bit 5] CMPIRE: Completion interrupt request enable
It sets whether an interrupt is generated when a token has been completed. Only the host mode is
effective. It is not initialized with the RST bit in the UDC control register (UDCC).
[bit 4] CNNIRE: Connection interrupt request enable
It is a bit used to set whether an interrupt is generated when a connection is made to a device. Only the
host mode is effective. It is not initialized with the RST bit in the UDC control register (UDCC).
[bit 3] DIRE: Disconnection interrupt request enable
It is a bit used to set whether an interrupt is generated when a disconnection is made to a device. Only
the host mode is effective. It is not initialized with the RST bit in the UDC control register (UDCC).
[bit 2] SOFIRE:SOF interrupt request enable
It is a bit used to set whether an interrupt is generated when sending an SOF. Only the host mode is
effective. It is not initialized with the RST bit in the UDC control register (UDCC).
318
CMPIRE
0 Completion interrupt disabled
1 Completion interrupt enabled
CNNIRE
0 Interrupt disabled when device is connected
1 Interruption enable when device is connected
DIRE
0 Interrupt disabled when device is cut
1 Interruption enable when device is cut
SOFIRE
0 Interrupt disabled when SOF is transmitted
1 Interrupt enabled when SOF is transmitted
Operation mode
Operation mode
Operation mode
Operation mode