Fujitsu F2MC-16LX Hardware Manual page 351

Table 14.4-3 Token Setting
bit6
0
0
0
0
1
Note:
The PRE packet is not supported.
When the SOFBUSY bit in the host state status register (HSTATE) is "1", setting bit 6, bit 5, and bit 4
to "1", "0", and "0", respectively, is forbidden.
[bit 3 to bit 0] ENDPT: end point
The transmitted and received endpoint to the device is set. To update them, you must set the RST bit in
the UDC control register (UDCC) to "0".
bit5 bit4
0 0
0 1
1 0
1 1
0 0
CHAPTER 14 USB Mini-HOST
Operation
No send out
SETUP is sent
IN is sent.
OUT is sent.
SOF is sent.
335