Password Protected Access To Net - Avaya DECT R4 Installation And Administration Manual

Installing and operating the AIWS and the AIWS2
Inserting a company logo
In the default GUI, a company logo can be inserted, for example, in a separate table above the
NetPage application.
In the examples index1, index2 and index3, the company logotype can be inserted in any of the
empty table cells of the NetPage application.
Password Protected Access to NetPage
For AIWS
If access to NetPage has to be password protected, do as follows:
1. Log on to AIWS with an FTP client. When secure mode is enabled, see
security settings
HTTP is automatically redirected to HTTPS and FTP access is not allowed. The FileZilla
Client freeware (not included) supports FTPES. Log on with "ftpuser". The default
password is "changemetoo".
Examples:
Windows Explorer: fill in "ftp://username:password@xxx.xxx.xxx.xxx" in the address
●
field.
Firefox (AIWS2 only): fill in "ftp://xxx.xxx.xxx.xxx" in the address field and log on with
●
"username" and "password".
2. Change the name of the file htaccess to .htaccess (a point is added in front of the
name).
With this modification, one has to log on with the user name "user" to get access to NetPage.
The default password is "password".
When secure mode is enabled, see
access via HTTPS and FTPES is allowed. HTTP is automatically redirected to HTTPS and FTP
access is not allowed. The FileZilla Client freeware (not included) supports FTPES.
For AIWS2
See NetPage configuration
Accessing NetPage from a Cordless Unit with WAP
NetPage can be accessed from a cordless unit that supports WAP. Two WML pages for this
purpose are included in NetPage. The page that is accessed is called send.wml and the
response is shown on receive.wml.
492
Avaya DECT R4 - Installation and Maintenance Guide
on page 380, only secure access via HTTPS and FTPES is allowed.
Web access security settings
on page 494.
Web access
on page 380, only secure
02/2016