Basic Configuration - Avaya DECT R4 Installation And Administration Manual

1. Click Configuration on the Start page.
2. Select Other Settings > Advanced Configuration in the menu on the Configuration
page.
3. Select SMS Character Set under DECT Interface in the menu on the Advanced
Configuration page.
4. Select one of the following:
Standard SMS - (Compatibility Mode): Standard SMS works with all handsets but
●
some special characters may not be correct.
Latin -1:Used for later generation of handsets.
●
UTF-8:Used for later generation of handsets. Use UTF-8 to include characters that is
●
not included in the Latin-1 character set.
Tip:
Russian requires UTF-8 character set.
Tip:
Note:
The UTF-8 character set requires an Avaya IP-DECT system with version 3.0 or
Note:
later.
5. Click Activate.

Basic Configuration

The basic configuration requires system administrator or administrator rights. With user rights
you will only be able to access and configure the Phonebook. Refer to
and Default Passwords
Central Phonebook Configuration
This chapter describes the configuration of the AIWS Central Phonebook.
The AIWS Central Phonebook gives the possibility to search for phone numbers in a local
database or in an LDAP server.
If the search is to be forwarded to an LDAP server, the LDAP parameters need to be configured
as described in
For information on phonebook administration, see
Avaya DECT R4 - Installation and Maintenance Guide
on page 378.
LDAP Parameter Setup on page 446.
Phonebook Administration
Basic Configuration
Authentication Levels
on page 390.
02/2016
443