Replacing An Image On The Compact Flash - Avaya DECT R4 Installation And Administration Manual

!
Important:
When updating the application software, the customized configuration of the
Important:
NetPage will be overridden and needs to be restored afterwards. Therefore it's
recommended to take a backup of all NetPage files as well. Refer to
and restoring NetPage files
1. Open the page xxx.xxx.xxx.xxx/system.
2. Press "Software". The current software versions for the application and Elise 2 Server
(AIWS Hardware) are shown.
3. Navigate to "Install software" and follow instructions.
Note:
The .eas files must be used to update the application software.
Note:
It is possible to update the software over a remote connection. However, note that it is not
possible to update software on the Elise 2 Server (AIWS Hardware) that handles the remote
connection.

Replacing an image on the Compact Flash

The complete Compact Flash image has to be replaced if the Elise 2 Server (AIWS Hardware)
operating system has been updated.
!
Important:
When a new image is installed, all information on the Compact Flash will be
Important:
replaced (this includes all IP settings). It is strongly recommended to take a
backup of the parameters before the image is installed in order to be able to
recover the unit to original setup. Refer to
files
1. Open the page xxx.xxx.xxx.xxx/system.
2. Press "Software". Navigate to "Install Image". Follow the instructions on the page.
3. Select parameter backup and take a backup of the current configuration incl. network
setup and license key.
4. Select start installation. The AIWS will reboot in image installation mode. If the automatic
redirect fails after the reboot press the back button in your browser. If this fails either open
the page http://xxx.xxx.xxx.xxx/install manually. Refer to
(AIWS)
5. Select the image file and press writ e to flash to start the installation. It will take some time
to install the new image. The time is dependent of the size of the image and the type of
connection to the Elise 2 Server (AIWS Hardware).
Avaya DECT R4 - Installation and Maintenance Guide
on page 502.
on page 693 to get further information.
Maintenance information for the AIWS
on page 502.
Backing up and restoring NetPage
Backing up
Avaya In-Building Wireless Server
02/2016
551