Easy Replacement - Avaya DECT R4 Installation And Administration Manual

If the electrical connection is damaged, it might not be possible to follow the Easy
●
Replacement procedure. Depending on fault, it might work to do a replacement via PDM/
AIWS, see
Replacement of the telephone with the PDM
If two telephones and their settings shall be switched between two users, follow
●
Replacement of a telephone with the AIWS/AIWS2
telephone with the PDM

Easy Replacement

The easy replacement procedure is done via the telephone display and does not involve a
PDM/AIWS. Instead a Advanced Charger or a Rackmount Charger is used.
The following settings are replaced during easy replacement:
DECT registration
●
User parameters (including User ID)
●
Contacts
●
The following settings are not replaced:
Call list
●
Messages
●
Bluetooth pairing list
●
Note:
Both the old telephone and the new telephone must be of the same model. The
Note:
same extension number is assigned to the new telephone.
Note:
If you are using the Rack Charger, the same charging slot has to be used for both
Note:
telephones. Currently, only the left charging slot is activated for easy
replacement.
Easy Replacement procedure
During the Easy Replacement procedure, the LEDs of the telephone and the charger follow the
same LED indications. This means that if the old telephone has a broken display, the LED
indications on the charger and on the telephone can be used to follow the replacement
procedure. Before and after easy replacement, the LEDs may have different LED indications.
For more details, see also
Note:
It is recommended to make sure that the telephone batteries are charged before
Note:
starting the easy replacement procedure.
Avaya DECT R4 - Installation and Maintenance Guide
Replacement of a telephone with the AIWS/AIWS2
on page 215.
LED indications
on page 215.
on page 213 or
on page 245.
Maintenance
on page 213 or
Replacement of the
02/2016
211