Installing and operating the IPBS and IPBL
Figure 35: Configure Kerberos server
1. Ensure that the IP address of an NTP time server is specified. Select General > NTP.
2. Select General > Kerberos Server.
3. Enter a root password for the Kerberos server. TThe system uses this password to encrypt
the information stored on the server.
4. Click OK. The Kerberos server is enabled.
5. Enter the realm name of your choice in the Realm field in upper-case letters.
6. Enter the following information for the users of the realm.
Field Name
Name
Password
Retype Password
Role
118
Avaya DECT R4 - Installation and Maintenance Guide
Description
Enter a login user name.
Enter a password.
Confirm password.
Administrator: Write access to all device
●
parameter settings.
Auditor: Read access to device parameter
●
settings.
Join Realm: Add devices to the realm.
●
02/2016