Backing Up The Configuration - Avaya DECT R4 Installation And Administration Manual

Installing and operating the AIWS and the AIWS2
1. Enter the timeout in minutes (0-1000 minutes), the default value is 10 minutes.
If no Status Logs should be blocked, set the timeout to 0.
2. Click Set timeout to save the setting.
An incoming fault will now be handled the first time it is received and then blocked during the set
timeout.

Backing up the configuration

This instruction is used to backup the Device Manager database and Elise 2 configuration. The
backup file is saved in a proprietary file format and cannot be edited. Save it in a place where
you can easily find it for a restore.
1. On the AIWS Start page, click on Configuration and log in.
2. Click on Other Settings in the left menu.
3. Click on Backup/Restore. The Backup / Restore view appears.
Figure 141: Parameter Backup / Restore
4. To make a backup file of the current configuration, click Backup in the Backup/Restore
window. The File Download popup appears.
5. Click Save. The Save As popup appears.
6. Select a location and enter a file name, then save the file.
Note:
The backup does not include customized GUIs (including NetPage files),
Note:
software files (.bin files) and certificates.
Since AIWS Edition 3 version 2.7x, the backup file includes the NetPage section
on the ftp side, the loaded software, and packet files as well as the user data
including local contacts. So the size of a backup file could increase significantly.
460
Avaya DECT R4 - Installation and Maintenance Guide 02/2016