Using the cable ducts for IPBS1
When the IPBS1 base station is mounted to the wall, you can route the wiring through the cable
ducts. See
figure 19
Figure 19: Minimum distances between a cable duct and the mounting bracket
Securing the cable
For safety reasons secure the base station cable to a convenient point at about 30 cm from the
base station. If for some reason the base station drops, it is secured by the cable.
Avaya DECT R4 - Installation and Maintenance Guide
on page 83 to fix the cable duct to the wall in one of the shown positions.
57 mm
TOP
75 mm
70 mm
15 mm thick cable ducts
65 mm
125 mm
Installing the Base Station
02/2016
83