Avaya DECT R4 Installation And Administration Manual page 350

Installing and operating the Portable Device Manager (WinPDM)
Import Language Files for Devices
Note:
To select the language to be used in the WinPDM, see
Note:
WinPDM GUI
For adding a new language to a device, a language file (.lng) distributed by your supplier must
be imported to the WinPDM and then uploaded to the device.
1. From the File menu, select File management.
2. Click the Language tab and then click the Add button.
3. Select the language files to be imported and click the Open button.
4. Only files with a corresponding extension are shown, such as .lng.
To apply the language for a device, continue with the instructions in Upload a Language to
Devices.
Upload a Language to Devices
It is possible to upload a language to devices that support this feature.
1. Click the Devices tab.
2. Select the device(s) to upload a language to. It is possible to select several devices, but
only devices of the same device type can be selected.
3. From the Device menu, select Upload Language.
4. In the Available files drop-down list, select which language to upload.
5. NOTE: If your language is not available in the drop-down list, the language file (.lng) can
be imported by clicking the Import button.
6. Click the OK button.
Import Company Phonebook Files
It is possible to import a company phonebook file for later use.
1. From the File menu, select File management.
2. Click the Company Phonebook tab and click the Add button.
3. Select the company phonebook files (.cpb) to be imported and click the Open button.
To upload the company phonebook to a device, continue with the instructions in Upload a
Company Phonebook.
350
Avaya DECT R4 - Installation and Maintenance Guide
on page 332.
Language Settings for
02/2016