Avaya DECT R4 Installation And Administration Manual page 99

Figure 31: Determine the IP address
2. To access the GUI, enter http://xxx.xxx.xxx.xxx in the browser address field where
xxx.xxx.xxx.xxx is the determined IP address.
3. After the first startup of the IPBS/IPBL:
On the IPBS: Select LAN > DHCP
●
On the IPBL: Select LAN1 > DHCP
●
In the Mode drop down list, change the DHCP mode from automatic to either client or disabled
(off). See Setting DHCP mode
Changing the default password
1. Enter the determined IP address in Determining the IP address in the web browser
address field.
2. Select General > Admin.
3. Enter user name and password in the dialogue box.
The default user name is: admin.
The default password is: changeme.
4. Enter a user name in the User Name text field.
5. Enter a password in the Password text field. Repeat the password in the second text field.
6. Click OK.
Avaya DECT R4 - Installation and Maintenance Guide
on page 140.
Configuration
99
02/2016