Avaya DECT R4 Installation And Administration Manual page 515

Precautions
Save this manual. It includes important safety information and operating instructions. Save
●
all instructions for future reference.
Install all wiring according to local, state, and federal electrical code requirements.
●
Connect AC (power supply) only to designated power sources as marked on the product.
●
!
!
WARNING:
DANGER: Never alter the AC cord or plug. If the plug will not fit into the outlet,
WARNING:
have a proper outlet installed by a qualified electrician. Improper connection
increases the risk of electric shock.
!
!
WARNING:
Ensure the AC receptacle is installed near the equipment and easily accessible.
WARNING:
Position the electrical cord to the AC power supply where it is least likely to be
subjected to damage or stress.
!
Important:
IMPORTANT: When mounting the device on a wall the device should (to fulfill the
Important:
fire classification) be mounted so the position of the connectors is in a vertical
plane, i.e. on the right and left side, see picture. Use fasteners supplied with the
system.
Four screws size 3,5×40 together with four wall plugs, and four screws size
M3×6, are delivered with the product. The M3×6 screws are used for attaching
the assembly brackets to the module. Use the 3,5×40 screws for walls made of
wood. For walls made of concrete and bricks use them together with the wall
plugs. For other types of walls use suitable screws and plugs according to wall
material.
For detailed mounting instructions refer to Installation Guide Elise3.
Avaya DECT R4 - Installation and Maintenance Guide
Software administration on the AIWS2
515
02/2016