Avaya DECT R4 Installation And Administration Manual page 45

complex and less homogenous, and placing the base station is more difficult. The client might
also have specific requirements that you must take into account such as coverage in a lift,
underground car park, conference rooms, and outdoors.
Base station planning is not difficult, but the size, architecture, and structure of buildings all
influence the field pattern which you cannot foresee. The quickest and simplest way is therefore
to measure WHAT. During a site survey, determine an average cell size with the help of a site
survey tool. The average cell size is the foundation of a base station planning.
To perform base station planning:
1. Determine the client specific requirements, see
2. Determine the average cell size using the site survey tool. See
cell size
3. Decide base station positions, see
4. Make a base station plan, see
5. Measure and confirm that speech and air sync coverage is as expected using the site
survey tool.
Avaya DECT R4 - Installation and Maintenance Guide
on page 53.
Client requirements
Location of the base stations
Making a base station plan
Base station planning
on page 46.
Determining the average
on page 58.
on page 60.
02/2016
45