Description
No route to destination, loop
Memory low (90%)
Remote LAN sniffer traces
The IPBS offers the ability to do remote LAN sniffer traces. The IPBS offers a PCAP interface
that can be connected by LAN sniffer tools like Wireshark.
1. Go to Diagnostics > Traces.
2. In the IP section, select the TCP/UDP Traffic check box.
3. In the Remote PCAP section, select the Enable check box to enable the Remote PCAP
interface.
Now the Remote PCAP interface "rpcap://xxx.xxx.xxx.xxx/trace" can be used in your wireshark
tool to connect to the IP interface.
Avaya DECT R4 - Installation and Maintenance Guide
Remote LAN sniffer traces
Code
0x0011005f
0x00120001
02/2016
679