Configuring Ptt On Meeting Exchange - Avaya DECT R4 Installation And Administration Manual

Configuring PTT on Meeting Exchange

Introduction
This chapter describes how to configure PTT for use on the DECT system.
Creating a DDI on the SMGR (Session Manager)
If you want to configure the direct conference for PTT calls, then you must create DDI aon
SMGR and boot the conference using the Avaya Bridge Talk software.
On the SMGR
1. Access the SMGR page.
2. Go to Element > Inventory.
3. Click on New.
4. Add the Meeting Exchange information as shown below:
5. Go to the SMGR page > Element > Meeting Exchange
6. Go to Meeting Exchange > Services
Avaya DECT R4 - Installation and Maintenance Guide
705
02/2016