Configuring Avaya DECT phones
Configuring a telephone with a template
Note:
Sample templates are included in the provisioning packages for the handset
Note:
software available on the Avaya support pages.
It is possible to select a telephone in PDM and directly change one or more configuration
parameters. It is recommended to use a template to apply configuration changes to telephones.
A template contains one or more parameter settings. By using a template, the same
configuration can easily be applied to many telephones simultaneously. Templates are an
efficient way to give good control over which changes that are applied to each telephone.
This enables configuration of all aspects of a telephone from sound volume to keypad shortcuts.
Your supplier can provide example templates for different PBX's. The telephone will have full
functionality towards the PBX even without such a template. By using such a template, though,
the telephone will be customized for that PBX with menu options for PBX specific functions such
as Callback.
Creating a template
To create a parameter template see chapter PDM
or chapter AIWS
Applying a template
To apply a parameter template see AIWS
page 413.
Saving a telephone configuration as a template
You can save all settings of a telephone as template. Note that this does not include contacts
and other personal data. The template will only contain configuration data.
This template can be used as a backup if your want to restore the configuration of the telephone
at a later stage or as a template that can be applied to a number of telephones.
Some parameters are user specific. If you decide to apply this type of template to several
telephones, the following parameters may be excluded:
Owner ID - A text string specified in the standby mode. The parameter is located directly
●
under Settings > User ID.
Phone lock PIN code - The security code used to unlock the keypad. The parameter is
●
located under Settings > Locks.
208
Avaya DECT R4 - Installation and Maintenance Guide
Creating a parameter template
Create a Parameter Template
on page 405.
Running a template to set parameter values
on page 344,
on
02/2016