Users - Avaya DECT R4 Installation And Administration Manual

Sending status log
It is possible to send alarm and event reports to the Unite system. For example, directly to the
Unite CM (Connectivity Manager) fault handler or to the UNA (Unite Node Assistant) which in
turn forwards the alarm event according to distribution lists.
1. Select UNITE > Status Log.
2. Enter the address to the server where the Status Log should be sent in the Unite IP
Address text field.
3. Enter the Resource Identity/Service in the Unite Resource Identity text field. If this field is
left empty, then the default will be UNA (Unite Node Assistant).

Users

This section describes the Users sub menu and how to do the following:
Add a user.
●
Add a user administrator.
●
Search for user information.
●
Show all registered users in the IP-DECT system.
●
Import a csv file with user information.
●
Export a csv file with user information.
●
Adding a user
For information on how to add users to the IP-DECT system, see
Add a User to Another IP-DECT System
To allow handsets to identify the system to which the subscription shall be directed (e.g. the
same physical area may be covered by different systems), it may be necessary to enter an
initial PARK into a handset.
To view the PARK and the PARK 3rd pty code:
1. Select Users > Users.
PARK: Must be used for Avaya handsets. Can also be used for other handsets if they
●
support a PARK that matches the SARI.
PARK 3rd pty: Must be used for handsets that do not support a PARK that matches the
●
SARI.
Avaya DECT R4 - Installation and Maintenance Guide
Operation
Adding users on page 112.
02/2016
171