Avaya DECT R4 Installation And Administration Manual page 248

®
Configuring Avaya Aura Communication Manager
Since Communication Manager 4.0.3 and Communication Manager 5.1 the optional feature
Location Based Routing for IP-Trunks was introduced which is important for Multi-Location
configuration. For Communication Manager versions below Communication Manager 6.0 the
SA field SA9004 - Location Based Routing for IP-Trunks on page 7 of the system-parameters
special-applications form needs to be enabled. Since Communication Manager 6.0 Location
Based Routing for IP-Trunks is part of the general Communication Manager features, hence
SA9004 is not available any more.
The Avaya 3720/3725 and 3740/3749 telephone user should use feature access codes (FAC),
programmed via PDM for in-call menu and/or call services menu in the phone for activating/
deactivating Communication Manager features if the station's COS has the Console Permission
turned off (set to 'n').
248
Avaya DECT R4 - Installation and Maintenance Guide 02/2016