Installing Elise 3 Server (AIWS2 Hardware)
Figure 194: Mounting on a wall
Rack mounting
The Elise 3 Server (AIWS2 Hardware) can either be front mounted or reverse mounted in a 19´´
rack.
Accessories required for mounting in a rack (To be ordered separately):
Standard 19" rack kit
Reverse 19 " rack kit
Front mounting single (requires the standard 19´´rack kit)
1. Fasten the big assembly bracket on the right side of the module and the small ssembly
bracket on the left side as shown in the figure below.
Figure 195: Front Mounting single rack 1
572
Avaya DECT R4 - Installation and Maintenance Guide
Connectors
Small left/right brackets for two front mounted Elise 3
modules and one big bracket for one front mounted
Elise 3 module.
Small left/right brackets for two front mounted Elise 3
modules and one big bracket for one reverese
mounted Elise 3 module
Connectors
02/2016