Avaya DECT R4 Installation And Administration Manual page 485

Default Send Message GUI
Figure 158: NetPage default user interface (index3)
The default NetPage user interface is index.html located on the AIWS FTP area and is opened
from the start page by clicking Send Message. See
Note:
On AIWS2, this is only valid if you select "Custom" for the default GUI on the
Note:
Advanced configuration - Web messaging page.
In the NetPage folder on the AIWS FTP area there are four examples of the NetPage user
interface, index1, index2, index3 and index4. Index3 is a copy of the default NetPage user
interface.
All NetPage functionality is included in the default user interface, but all parameters that can be
configured in the example user interfaces index1, index2 and index3, are not shown. The
necessary code for viewing and configuring the hidden parameters is included, but they are
marked as comments to prevent the browser from interpreting them, see
161 on page 488.
The default user interface can be exchanged with one of the example user interfaces, shown in
figure 159 on page 486, by saving the html file as index.html and replacing the existing
index.html file. index4 is shown in
Avaya DECT R4 - Installation and Maintenance Guide
Administration of language and user interface
figure 158
figure 162 on page 490.
above.
figure 160 and
02/2016
figure
485