Ip-Dect Planning And Deploying; Avaya Ip-Dect System Components; Dect Cordless Handsets - Avaya DECT R4 Installation And Administration Manual

Avaya IP-DECT System Description
QSIG has two layers, called BC (basic call) and (GF) generic function. QSIG BC describes
●
how to set up calls between PBXs. QSIG GF provides supplementary services for
large-scale corporate, educational, and government networks, such as line identification,
call intrusion and call forwarding. Thus for a large or very distributed company that
requires multiple PBXs, users can receive the same services across the network and be
unaware of the switch that their telephone is connected to. This greatly eases the
problems of management of large networks.

IP-DECT planning and deploying

Each unit of IP-DECT provides radio access within a pre-defined area called a cell. To enable
seamless handover for the mobile devices, cell planning is important when deploying the
IP-DECT System. See the documentation from the DECT supplier if you are using a 3rd party
DECT system. Also see

Avaya IP-DECT system components

The Avaya IP-DECT system is created using Avaya developed products, as well as third-party
products. This section gives a brief description of the components needed.

DECT cordless handsets

The DECT Cordless Handsets are available in a number of versions. From handsets with basic
functionality suitable in office environments to handsets suitable in environments with needs like
supervision, alarm functions and EX-classification.
The IP-DECT system has support for all DECT Cordless Handsets. No changes of the handset
is needed.
Handset installation on the DECT System/I55 System
Note:
The handset to be installed must not have any previous valid registrations. If it
Note:
has a valid registration, unsubscribe the handset
36
Avaya DECT R4 - System Description
Planning an IP-DECT system on page 43.
02/2016