Installing Elise 3 Server (AIWS2 Hardware)
10. Click "Install this driver software anyway". The installation of the port driver begins.
11. Click "Close" when the installation has finished. The port driver "Linux USB Ethernet/
RNDIS Gadget" is now installed in Control Panel > Hardware and Sound > Devices and
Printers > Device manager > Network adapters.
Basic configuration
Elise 3 Server (AIWS2 Hardware) needs to be configured with basic settings. Some products
settings can be set in an installation Setup Wizard accessible from the web interface. The Setup
Wizard will start automatically the first time the module is accessed from the web browser and
every time until the configuration is saved. Follow the wizard and fill in the required data (IP
address, NTP server, license etc.). After it is saved the wizard can always be opened from the
start page. Other settings are set from the application's configuration pages and are described
in the application's Installation and Operation Manual.
For products not having a Setup Wizard, all settings are configured from the product's
Advanced Configuration page, see
586
Avaya DECT R4 - Installation and Maintenance Guide
Setup using the Advanced configuration page
on page 587.
02/2016