Lan/Wan; Ldap; Supported Third-Party Functions - Avaya DECT R4 Installation And Administration Manual

With the subscription method "With User AC", the system will allow subscription attempts only
after activation in the IPBS/IPBL web GUI. The system will thereafter remain in enabled
subscription mode for a maximum time of two minutes. After successful registration of the
activated IPEI, the system will not allow registrations any longer.

LAN/WAN

Several vendors provide components needed to deploy a LAN or WAN. For optimal
performance for IP-DECT the following is recommended:
Administer Quality of Service (QoS)
●
Connect the infrastructure to a switched network. (i.e hubs or repeaters should be
●
avoided)
Use a backbone of least 100 Mbps depending on the network size.
●

LDAP

The LDAP protocol is used in the IP-DECT system between two or more Master IPBSs/IPBLs if
different network regions shall be used.

Supported third-party functions

IP-PBX are examples of third-party products required when setting up the DECT infrastructure.
The Avaya developed products are designed to work in system provided by different vendors.
Avaya DECT R4 - System Description
System overview
23
02/2016