Installing and operating the Portable Device Manager (WinPDM)
1. Click the Devices tab.
2. Select device(s) to be reset.
3. From the Device menu, select Factory reset.
4. Click the Yes button.
Device Properties
To get a summary of the properties of a device:
1. Click the Devices tab.
2. Select the device which properties you want to show.
3. From the Device menu, select Properties.
The following information is displayed:
Description of the device (if entered by the WinPDM user)
●
Device ID
●
Device type
●
Parameter version
●
Software version
●
Last known number
●
Online status
●
File upload information
●
Templates
Templates are a collection of user defined parameter values. These templates can be used to
create common settings to be used on several devices of a certain device type.
Note:
Templates created in one site are also selectable in the other sites used in
Note:
WinPDM.
Create a Parameter Template
1. Click the Templates tab.
2. From the Template menu, select New.
3. Select device type and parameter version, enter a name for the template, and click the OK
button.
344
Avaya DECT R4 - Installation and Maintenance Guide
02/2016