Avaya DECT R4 Installation And Administration Manual page 356

Installing and operating the Portable Device Manager (WinPDM)
A Parameter conflict dialog window If a device is detected and the same
appears Number has been used by another
device in the system there will be a
parameter conflict. A dialog window
appears, asking the user to decide
whether to use the Number settings
in WinPDM or the Number settings in
the device.
One typical situation when this
parameter conflict will occur is if a
device's hardware has been
replaced.
For example:
A replacement device has first been
registered with the same Number as
the damaged device. When the
replacement device is connected to
the WinPDM, the WinPDM will warn
for a parameter conflict.
In this case, select "WinPDM" to
transfer the phonebook of the
damaged device (located in
WinPDM) to the new device.
If "Device" is chosen in this situation,
the phonebook belonging to the
damaged device and located in
WinPDM will be deleted (and
replaced with the empty phonebook
in the replacement device).
For more information about device
replacement, see the User Manual or
Configuration Manual for respective
device.
356
Avaya DECT R4 - Installation and Maintenance Guide 02/2016