Avaya DECT R4 Installation And Administration Manual page 352

Installing and operating the Portable Device Manager (WinPDM)
Import Numbers
Updated Number files may be distributed by your supplier.
1. From the File menu, select Import > Numbers.
2. Select the Number file(s) to be imported (*.xcp) and click the Open button.
If there is a Number conflict when importing Numbers, the error message Number import failed:
Number already exists is displayed.
Export Numbers to a File
It is possible to configure Numbers for a site and export the settings to a file. One or several
Numbers can be selected. The exported file can then be used when producing new devices for
the customer. Only Numbers stored in the database can be exported. There is no restriction on
device type when exporting.
1. Click the Numbers tab.
2. Select the Number(s) to be exported
3. From the Number menu, select Export.
4. Enter a file name for the Numbers (.xcp) and where to save the file and click the Save
button.
Import Templates
Updated template files may be distributed by your supplier.
1. From the File menu, select Import > Templates.
2. Select the template files to be imported (*.tpl) and click the Open button.
If there is a naming conflict when importing a template, the new template is imported and a digit
within brackets is added after the name. The old template's name is not affected.
For example:
Template MyHandset (old template)
Template MyHandset (2) (new template)
Export Templates
It is possible to export template files. One or several templates can be exported.
1. Click the Templates tab.
2. Select the template (or templates) to be exported.
3. From the Template menu, select Export.
352
Avaya DECT R4 - Installation and Maintenance Guide 02/2016