Avaya DECT R4 Installation And Administration Manual page 206

Configuring Avaya DECT phones
Create an identity for the telephone in the PDM/AIWS – needed to be able to configure the
●
behavior of the telephone and take backups of the telephone configuration
(Recommended).
Configure the telephone using PDM/AIWS – customize the behavior of the telephone to
●
suite each user profile and the specific PBX used in the system (Recommended).
Note:
If no system name is assigned while subscribing a handset on the DECT R4 IPBS
Note:
master, the system name as set in the IPBS master System Name will be used.
The installation is described in two different scenarios, see below. Before starting, check which
scenario that suits best.
Scenario 1
Note:
This scenario is valid for Avaya IP-DECT and Integral Enterprise Systems. If
Note:
subscribing towards Integral 5 or other systems, follow Scenario 2.
Note:
The telephone to be installed must not have any previous valid registrations. If it
Note:
has a valid registration, unsubscribe the telephone or use Scenario 2. The user ID
of the telephone is reset when you remove the last subscription.
Subscribing and creating an identity
1. Subscribe the telephone towards the DECT system. The subscription procedure is
described in User Manual, Avaya 372x/374x telephone. During the subscription
procedure, the PDM/AIWS identity (User ID) will automatically be assigned to be the same
as the extension number.
Note:
The User ID can be viewed by navigating to the menu:
Note:
Settings > Device info > User ID or in the Admin menu:
Settings > Admin menu > Device info > User ID.
To find the Admin menu, see
Configuring the telephone
1. Insert the telephone into a Advanced Charger or Rackmount Charger connected to PDM/
AIWS (not needed if an over the air connection is used). The telephone can be identified
by finding the extension number of the telephone in the Number column or IPDI of the
telephone in the Device ID column.
In Telephone configuration
made.
2. Configure the telephone using the PDM/AIWS, see
template
206
Avaya DECT R4 - Installation and Maintenance Guide
on page 218 there are examples of configurations that can be
on page 208.
Admin menu tree on page 242.
Configuring a telephone with a
02/2016