License - Avaya DECT R4 Installation And Administration Manual

Table 2: Connections, buttons and LEDs on the Elise 3 Server (AIWS2 Hardware)
Rear panel
In1/In2 and
Out1 Out2
COM1/COM2

License

All Elise 3 Server (AIWS2 Hardware) units must have a valid software license. The license
document is included in the AIWS2 package.
You can find the license on the administration web page, under the section System
Setup > Common > License.
!
Important:
Changing this field may seriously affect the functionality.
Important:
If no valid license is present, the unit can be started in unlicensed mode, see
mode on page 565 and
Note:
Licenses can be moved from Elise 2 to Elise 3 server, refer to
Note:
from Elise 2 Server (AIWS Hardware) to the Elise 3 Server (AIWS2 Hardware)
page 595.
Mac address
The MAC address can be found on a label on the products rear side, in the application's GUI in
the Setup Wizard, on the Configuration page (the first view) and on the Advanced Configuration
page in Troubleshoot > System Information. It is also found in the Boot Mode GUI under System
> Information.
Avaya DECT R4 - Installation and Maintenance Guide
Connects AUX inputs and AUX outputs, see
inputs and AUX outputs
COM ports for connection of RS232 communication, see
Ports (RS232 communication with external equipment)
page 578
Not applicable for the Elise 3 Lite version
Operating modes on page 564 for more information.
Connection of AUX
on page 580
AIWS2 Overview
COM
on
Unlicensed
Moving a license
on
563
02/2016