Replacing An Existing Elise 2 Module With Elise 3 - Avaya DECT R4 Installation And Administration Manual

Installing Elise 3 Server (AIWS2 Hardware)
Under System > Network you can view the network settings. All network settings can be edited
in this view if DHCP is disabled, but only the Host name if DHCP is enabled.
You can view the installed software name, version and installation date Under Software >
Information. If two versions have been installed, information about both versions and also which
version that was last used by the module is shown. The format of the installation date is
dependent on the PC's language settings.

Replacing an existing Elise 2 module with Elise 3

For a hardware replacement of an Elise 2 module with an Elise 3 module follow the steps:
1. Create a backup of your configuration on the Elise 2 module.
2. Restore the backup of the configuration on the Elise 3 module.
594
Avaya DECT R4 - Installation and Maintenance Guide 02/2016