Operation
Charger operation
Operation when charger is connected to power supply
When the charger is connected to external power supply, the following normal operation can be
done:
Telephone charging
1. Connect the charger to the AC power supply.
2. Place a telephone in the charging slot to start charging.
Telephone disconnection
1. First, tilt the telephone forwards.
2. Then, lift the telephone upwards.
Note:
Do not try to lift the telephone upwards before tilting it forwards.
Note:
Easy Replacement
The Advanced Charger supports the Easy Replacement feature. Easy replacement is
performed via the telephone display and does not involve PDM or AIWS. The Advanced
Charger only needs a power connection to support easy replacement. A connection to PDM/
AIWS is not needed.
See the Configuration Manual for your cordless telephone for details.
Note:
The Advanced Charger software needs to be of version 1.3.7 or higher.
Note:
Operation when charger is connected to PDM/AIWS
When the charger is connected to a PDM/AIWS, the following additional operations can be
done:
Software upgrade (of charger or telephone)
●
Parameter editing (of charger or telephone)
●
Phonebook upload
●
Avaya DECT R4 - Installation and Maintenance Guide
Operation
277
02/2016