Avaya DECT R4 Installation And Administration Manual page 91

Figure 28: Pin Diagram for Sync OUT cable connections
3. Label the cable.
Preparing the LAN cable for IPBL
Note:
The TX/RX crossover/straight cable feature does not work for the IPBL. Connect
Note:
a straight cable between the IPBL and the switch port.
1. Cut the cable to the correct length.
2. Connect the cable to a RJ45 modular jack.
Figure 29: Pin connections for the lan cable
3. Lable the cable.
Avaya DECT R4 - Installation and Maintenance Guide
Installing and operating the IP-DECT Gateway (IPBL)
RJ45
modular jack
1 2 3 4 5
RJ45
modular jack
1 2 3 4 5
6 7 8
EPP= Express Power pairs
SC = Data pair lead
NC= Not Connected
6 7 8
NC = Not Connected
91
02/2016