Avaya DECT R4 Installation And Administration Manual page 406

Installing and operating the AIWS and the AIWS2
Figure 109: Edit Template parameter view
4. Select the parameters you want to be saved in the template by selecting the check box to
the left of each parameter.
5. Change the parameters to the desired values.
6. Click OK.
Creating a parameter template from a number
It is also possible to create a template from a Number in the Device Manager.
1. Select the Numbers tab.
2. Mark the Number you want to use.
3. Right click on the Number and select Use as template...
The Enter template name dialogue opens.
4. Enter a name for the template.
5. Click OK.
6. The Edit template dialogue opens. Continue with 4 to 6 in
template
Note:
When the Edit template window is opened from the Use as template command,
Note:
an extra drop-down list, Select is shown in the bottom left corner. This setting
decides which parameters that shall be copied from the Number. If All
parameters is selected, the synchronization time will be longer.
406
Avaya DECT R4 - Installation and Maintenance Guide
on page 405.
Creating a parameter
02/2016