Configuration - Avaya DECT R4 Installation And Administration Manual

7. Right click "RNDIS/Ethernet gadget" and select "Update driver software". A new window
opens.
8. Click "Browse my computer for driver software".
9. Browse to the folder where the port driver is saved and click "Next". A Windows Security
window opens.
10. Click "Install this driver software anyway". The installation begins.
11. Click "Close" when the installation has finished. The port driver "Linux USB Ethernet/
RNDIS Gadget" is now installed in Control Panel > Hardware and Sound > Devices and
Printers > Device manager > Network adapters.

Configuration

The product needs to be configured with basic settings. Some products settings can be set in
an installation Setup Wizard accessible from the web interface. The Setup Wizard will start
automatically the first time the module is accessed from the web browser and every time until
the configuration has been saved. If the product has not got a Setup Wizard all settings are set
from the products configuration pages, see
page 514.
Note:
For extended configuration, refer to the Installation and Operation Manual for this
Note:
product.
Avaya DECT R4 - Installation and Maintenance Guide
Software administration on the AIWS2
Setup from the Advanced Configuration Page on
513
02/2016