Avaya DECT R4 Installation And Administration Manual page 459

Symbols used in the Fault Log
Symbol
To get more detailed information about the events, it is possible to expand the log entries by
clicking the Expand all entries link. Single log entries can be expanded by clicking the
individual plus symbol.
Note:
When the persistent fault is recovered, it takes a while before the persistent fault
Note:
is cleared.
Administering fault log
In the Administer Fault Log page, it is possible to export the log file to CSV (Comma
Separated Values) file format, and to clear the status log file from non-active faults.
1. Click Configuration on the start page.
2. Select Other Settings > Administer Fault Log in the left menu on the AIWS
Configuration page to open the page.
Exporting a fault Log
Click to export the fault log. The log will be exported in csv format.
1. Click Export.
2. Click Save in the dialogue window and enter the file name (default name statuslog.csv)
and the file path.
Clearing fault
This functionality removes all non-active faults from the fault log.
1. Click Clear.
2. Click Yes in the dialogue window to remove all non-active faults from the status log file.
Timeout
Repeated faults can be blocked, i.e. the fault will be discarded and no actions will be taken. The
incoming fault will be handled when first received and blocked during the set timeout.
Avaya DECT R4 - Installation and Maintenance Guide
Description
Active persistent fault
Persistent fault that has been handled
Reset message, no fault exists
Basic Configuration
459
02/2016