Password Policy - Avaya DECT R4 Installation And Administration Manual

Installing and operating the AIWS and the AIWS2

Password policy

The required password complexity can be set in AIWS, follow this instruction:
1. Login to AIWS.
2. Click on Configuration.
3. In the left pane, select Other Settings > Advanced Configuration.
4. Under Security, select Password policy. The Password Policy page opens
Figure 91: The Password Policy page
5. Select password policy.
6. Click Activate.
It is also possible to select previous or factory settings.
Web access security settings
When secure mode is enabled (recommended), only secure access via HTTPS and FTPES is
allowed. HTTP is automatically redirected to HTTPS and FTP access is not allowed.
The web access security level can be set as follows:
1. Login to AIWS.
2. Click on Configuration.
3. In the left pane, select Other Settings > Advanced Configuration.
4. Under Security, select Web access. The Web Access Security page opens
380
Avaya DECT R4 - Installation and Maintenance Guide 02/2016