Maintenance - Avaya DECT R4 Installation And Administration Manual

Configuring Avaya DECT phones

Maintenance

Definitions
In the replacement descriptions, the telephones are defined as:
"old telephone" is the telephone to be replaced, possibly damaged but still working
●
"new telephone" is the replacement telephone that will get the settings used in the old
●
telephone
Upgrading telephone software
It is possible to upgrade or reinstall the software on a telephone. When upgrading the software
of the telephone, any data (for example, messages) may be deleted.
For upgrading a telephone see chapter PDM
chapter AIWS
Performing a Factory reset
When you perform a Factory reset on a telephone, all configuration settings will be restored to
default values, PBX subscriptions will be removed and all data are removed. This includes
contacts, messages etc. The software will be left intact.
Factory reset is activated from the Admin menu. See
activate the Admin menu, and
"Factory reset". It can also be activated from PDM.
After a Factory Reset, you should follow the steps under
page 205.
Replacement procedure choice guide
Depending on situation, two different replacement procedures can be chosen; replacement via
PDM/AIWS and Easy Replacement. Use the following list as a guide to choose which
procedure to use.
If a telephone needs to be replaced due to for example a broken display, see
●
Replacement
210
Avaya DECT R4 - Installation and Maintenance Guide
Upgrading a device with new software
Admin menu tree
on page 211.
Delete Imported Files for Devices
on page 433.
Administration
on page 242 to see where in the menu to find
Installation of a new telephone
on page 351, or
on page 242 to see how to
on
Easy
02/2016