1. Click Configuration on the start page. The AIWS Configuration page appears.
2. Select Other Settings > Advanced Configuration in the left menu on AIWS
Configuration page. The AIWS Advanced Configuration page appears.
3. Select Web Messaging in the left menu. The Message page appears.
Figure 164: The Message configuration page.
Note:
The setting for the Default GUI is available in AIWS2 only.
Note:
4. Enter values for messaging.
5. Click Activate.
The following parameter can be set:
Message max length.
●
Sets the maximum number of characters that can be forwarded to a unit. Messages longer
than the set value are truncated.
Call ID range - Lower limit
●
Sets the lower limit of a Call ID range. Messages sent to Call IDs out of this range are
canceled. If a group of Call IDs partly consists of Call IDs out of this range, the message
will only be sent to the Call IDs within the range. An empty field means no lower limit.
Call ID range - Upper limit
●
Sets the upper limit of a Call ID range. Messages sent to Call IDs out of this range are
canceled. If a group of Call IDs partly consists of Call IDs out of this range, the message
will only be sent to the Call IDs within the range. An empty field means no upper limit.
Avaya DECT R4 - Installation and Maintenance Guide
Messaging
495
02/2016