Figure 33: Configuring Simplified GUI
Changing the interface to basic view
To change the advanced administration interface to the basic view:
1. Select General > Admin.
2. In the Administration Mode section, clear the Show Advanced Options check box.
3. Click OK.
4. Refresh the web browser to decrease the number of visible sub menus and tabs.
Configuring the Master
1. Determine the address and access the GUI. See
2. Change the default password. See
3. Configure LDAP user name and password, mark the Write Access check box. See
Configuring LDAP Server
Avaya DECT R4 - Installation and Maintenance Guide
Changing the default password
on page 145.
Accessing the GUI
on page 96.
on page 99.
Configuration
107
02/2016