Commissioning - Avaya DECT R4 Installation And Administration Manual

Commissioning

Follow these instructions to verify that the charging works.
1. Connect the charger according to chapter
2. Place a telephone in the charging slot to start charging. The telephone indicates the
charging progress, see respective user guide for details.
See figure 59
Follow these instructions to start PDM or AIWS.
In the case of Portable Device Manager (PDM):
1. Check that the charger is connected to your PC via USB.
2. Start PDM.
3. Go to the Devices tab and verify that the Advanced Charger is online.
Figure 61: Desktop Charger in PDM.
In the case of Avaya In-Building Wireless Server (AIWS):
1. Check that the charger is connected to the LAN.
2. Start AIWS.
3. Go to the Devices tab and verify that the Advanced Charger is online (it may take up to
15 s).
Avaya DECT R4 - Installation and Maintenance Guide
on page 272 to see the connections to the charger.
Advanced Charger installation
Commissioning
on page 272.
275
02/2016