Function Indicator and Error Relay Output
For Elise 2 (AIWS Hardware)
Figure 167: The function indicator that indicates the status of the AIWS
Function indicator
The function indicator and the error relay indicate the status of the AIWS. The indication is
dependent of whether the AIWS is connected to the A-bus or not and also whether there is a
Central Unit connected to the A-bus. Which mode the AIWS uses is set on the AIWS
administration pages. The function indicator and error relay indications are described below.
Avaya DECT R4 - Installation and Maintenance Guide
Function Indicator and Error Relay Output
519
02/2016