Installing Elise 2 Server (AIWS Hardware)
2. Open the page System Setup > General on the administration web page and check that
the correct license is entered.
3. Press "Reboot".
Function indicator
Figure 170: Status is indicated by the Function Indicator according to the list below.
Function indicator
LED Indication
Colour
Green
Orange
Orange
Orange
Orange
Orange
Orange
Red
Red
Red
Red
Red
Red
530
Avaya DECT R4 - Installation and Maintenance Guide
Each segment = 100 ms
Status
OK. Running
1
Fail-safe mode
2
Network setup mode
Image installation mode
3
Starting up
Power up
Restart
Halted (auto. restart after 10 min.)
Unlicensed mode
Low voltage
Licence error
Watch-dog reset
Shut-down
Memory error (3 s ON / 3 s OFF)
Network error (IP interface initiation error)
Module key error (Module key not found)
02/2016