Disabling The Netbios Service - Avaya DECT R4 Installation And Administration Manual

Figure 92: The Web Access Security page
5. Select if Secure Mode shall be enabled or not.
6. Click on Activate
It is also possible to select previous or factory settings.
Note:
AIWS2 supports SSLv3.0 and TLS 1.0 for secured connections.
Note:

Disabling the NetBIOS Service

The NETBIOS Service makes it possible to access the module with the NetBIOS name
"elise-XXXXXXXX", where XXXXXXXX is the module key number.
1. The NetBIOS port is enabled by default, but can be disabled if needed for security
reasons.
2. Click "Configuration" on the start page.
3. Select Other Settings > Advanced Configuration in the menu on the Configuration
page.
4. Select IP Ports in the menu on the Advanced Configuration page.
Figure 93: IP Ports setting on Advanced configuration page
5. Select "Disabled" int the drop down list.
6. Click "Activate".
Avaya DECT R4 - Installation and Maintenance Guide
AIWS Overview
381
02/2016